Ondox Silver Class and jewelry UBUD

The best part of Ondox Silver Class is that you do not simply buy a Balinese souvenir. You design and shape one in a small family workshop across from the Ceking rice terraces. With guidance from Kedak and Komang, you can make a ring, pendant, earrings, bracelet, or another simple piece, then take it home.

I like the personal instruction and the setting. Groups are limited to five people, so you get real help rather than a quick demonstration. I also like the useful souvenir: a ring or pendant carries more meaning when you have worked on it yourself. The main consideration is that the included silver amount is described as both 5 grams and 6 grams in the supplied details, so confirm the allowance before you begin.

Key points to know before booking

• A small family workshop: The class is run by Balinese husband-and-wife artisans, Kedak and Komang.
• Across from the rice terraces: The workshop is on Jl. Raya Tegallalang, near the Ceking rice terraces and Cretya area.
• You make the design: Rings, earrings, bracelets, pendants, and other simple pieces are possible, but the casting process is not included for you to perform.
• Small groups matter: The maximum is five people, which allows patient, hands-on help.
• Budget for extra silver: The included amount is listed as 5 grams in one section and 6 grams in another. Additional silver is priced at IDR 80,000 per gram.
• Allow about two hours: The stated class length is roughly 1.5 to 2 hours, with an extra fee if you go beyond the allotted time.

A hands-on souvenir near Ceking rice terraces

Ubud has plenty of shops selling silver jewelry. This class gives you something different: a chance to take part in making the piece. You begin with an idea for your jewelry, perhaps a plain band, a small pendant, or a design saved on your phone. The family then helps you turn that idea into something workable.

The workshop is north of central Ubud in Tegallalang, directly across from the Ceking rice terraces. That location adds value because you can pair the class with a visit to the terraces, rather than making a separate trip across the area. The class itself takes place in a small family setting, not a large commercial studio.

Kedak and Komang have more than 10 years of experience making pure silver jewelry for local Balinese customers. Their role is not just to show you finished examples. They guide you through the stages you can handle, then step in when a task needs an experienced hand.

That balance is important. You do not need previous jewelry-making experience, and the process is explained in simple terms. At the same time, the finished piece benefits from professional help, especially during the more delicate steps.

What happens during the 1.5 to 2 hour class

The class starts at the Ondox workshop on Jl. Raya Tegallalang. Bottled water and local snacks are provided, and free Wi-Fi is available. The welcome is part of the appeal here. You are visiting a working family business, and the atmosphere is informal and personal.

Next comes the design stage. You can choose a ring, bracelet, earrings, pendant, or another piece of jewelry. The family is open to your own idea, and several people have arrived with a picture on their phone to use as a guide.

Simple designs are the easiest fit for the time and silver allowance. A plain ring, textured band, small pendant, or modest pair of earrings should be more manageable than a large or highly detailed piece. More complicated designs need more help from the instructors, and a complex idea may use more silver or take longer.

You then work with the silver through the stages that are suitable for a short class. The instructions state that you can create your own design except for the casting process. In practical terms, you take part in the making, but the artisans handle any step that requires specialized equipment or greater technical control.

Expect plenty of shaping, smoothing, and finishing. The exact order can vary with your design. The family’s job is to show you how each stage works while stepping in when needed. This makes the activity suitable for first-timers, including people who worry they are not especially crafty.

The final stage is finishing the jewelry so you can take it home. The strongest part of the class is the sense that your piece is not simply a pre-made item with your name attached. You have made decisions about its form and taken part in its production.

Choosing a design that fits the class

Keep your design practical. If you want a ring, a simple band or a modest pattern gives you room to learn the process without rushing. If you have a special symbol or shape in mind, show the artisans a picture before work begins so they can explain what is possible.

The silver allowance is a real limit. The information gives two figures: the tour overview says 6 grams, while the inclusion details say 5 grams of pure silver. One guest specifically described receiving 6 grams, while the formal inclusion notes list 5 grams. Since the difference can affect a second small ring or a heavier design, ask the workshop to confirm the current allowance when you book.

Additional silver costs IDR 80,000 per gram. Gemstones are also available for an extra charge. This can add color and character to a pendant or ring, but it changes the final cost. Ask about the price before choosing a stone.

The class can produce more than one small item if the silver allows it. A pair of small rings made from the allowance has been possible for some participants, but you should not assume every design will stretch that far. A larger bracelet or detailed pendant will use more material.

Why the small group makes a difference

The maximum group size is five people. That is a useful detail, not just a marketing line. Jewelry work involves small tools, close attention, and repeated questions. In a large class, you might spend more time waiting for help. Here, the husband-and-wife team can move between participants and offer direct assistance.

The family’s teaching style suits beginners. The process is broken into clear steps, and the instructors provide enough support to keep the finished piece looking polished. One particularly useful detail is that they can help adapt designs rather than forcing you into a fixed template.

That support also helps if English is not your strongest language. The class has been described as simple to follow, and the family has helped parents who had difficulty understanding English. You still need to communicate your design clearly, but you do not need technical jewelry vocabulary.

The class is also forgiving when transport problems cause a late arrival, based on the experience described in the supplied material. Still, do not plan to arrive late. The stated time is already fairly short, and arriving on schedule gives you more time to shape and finish your piece without an added charge.

The rice terraces add value to the outing

The workshop is across the road from the Ceking rice terraces and close to the Cretya area. That makes it easy to combine the class with a terrace visit before or afterward. You can make the jewelry activity the main reason for the trip, then add the scenery without arranging another transfer.

This location is also a practical reason to choose Ondox over a workshop in central Ubud. You get a change from the town center and a rural setting around the class. The trade-off is transport. Shuttle service is not included, so you must arrange your own way there and back.

The meeting point is the workshop itself at Jl. Raya Tegallalang, Tegallalang, Gianyar, Bali 80561. Online taxis such as Grab and Gojek can reach the area, according to the supplied information. Check the driver’s route and the exact map pin before setting out, especially if you are coming from central Ubud.

The class ends at the same meeting point. That is convenient if you want to continue to the rice terraces, but you remain responsible for your onward transport.

Is the $30.56 price good value?

At about $30.56 per person, the price is fair for a small class that includes silver, instruction, snacks, water, and a finished piece. You are paying for two things: the material and the time of two experienced artisans. The personal help is more valuable here than a long list of included extras.

The price becomes better value if you want a keepsake with a story behind it. A shop-bought silver ring may cost less, depending on its design, but it will not carry the memory of shaping it yourself. This class is also useful for couples, friends, and families who want to make matching or related pieces.

The value is less clear if you want a large item, a precious gemstone, or a complex design. Extra silver, gemstones, and time beyond the class limit cost more. Ask about all additions before you begin so the final price does not surprise you.

There is also a direct-booking price of about 450,000 Indonesian rupiah mentioned in the supplied material, along with a 6-gram allowance. Prices and inclusions can change, so compare the current booking price and confirm how much silver is included before choosing the payment method.

What the finished jewelry is really like

The instructors help you reach a polished result, but you are still taking part in a craft class rather than ordering custom jewelry from a professional bench jeweler. Small irregularities can be part of the charm. If you want a perfectly manufactured piece with no sign of handwork, a jewelry shop may suit you better.

If you want a personal item, the handmade quality is a strength. You can design something contemporary, use a simple Balinese-inspired detail, or make a piece based on a personal symbol. Several class participants have created rings, bangles, pendants, and multiple small pieces.

The most praised feature is the finished keepsake. A ring is easy to wear during the rest of your trip, while a pendant or pair of earrings makes a light souvenir for home. The instructors’ help also means you do not leave with a rough lump of silver and a polite smile. They work with you to make the result presentable.

Who will enjoy this class most

I would choose Ondox Silver Class if you want an activity with a clear result. You are not just watching a demonstration, and you are not buying something from a shelf. You are making a small object you can use or give as a gift.

It suits:

• Couples who want matching or related jewelry
• Friends looking for a shared activity near Tegallalang
• Families with older children who can follow simple instructions
• First-time jewelry makers
• Anyone who wants to combine a craft class with the Ceking rice terraces
• Visitors who value a small family business and direct local instruction

It may not suit you if you need hotel pickup, dislike handwork, or want a large and highly elaborate piece within the base price. The class is also not ideal if you have only a very narrow schedule, since the location is outside central Ubud and the activity can run close to two hours.

Timing, cancellation, and practical details

Multiple class times are available each day, making it easier to fit the workshop around other Ubud plans. The class lasts about 1.5 to 2 hours. If you go beyond the scheduled duration, an additional fee of IDR 75,000 applies.

Confirmation is provided at booking. The activity is near public transportation, and most people can participate. No shuttle is included, so arrange a Grab, Gojek, or another form of transport to the meeting point.

You can cancel for a full refund if you do so at least 24 hours before the start time. Changes or cancellations made within 24 hours are not accepted for a refund. If the minimum number of participants is not reached and the class is canceled, you are offered another date or experience, or a full refund.

Should you book Ondox Silver Class?

Book it if you want a personal souvenir, patient help, and a small family setting near the rice terraces. The strongest reasons are the five-person maximum, the chance to bring your own design, and the fact that you take home something you helped make.

Before paying, confirm the current silver allowance, the cost of gemstones, and the class end time. If you keep your design simple and arrive on time, the $30.56 price offers a good mix of instruction, local contact, and a lasting piece of Bali.

FAQ

Where does Ondox Silver Class take place?

The class takes place at Ondox Silver Class and Jewelry, Jl. Raya Tegallalang, Tegallalang, Gianyar, Bali 80561, Indonesia. It is near the Ceking rice terraces, north of Ubud.

How long does the class last?

The stated duration is about 1.5 to 2 hours. An additional fee of IDR 75,000 applies if the class runs beyond the scheduled time.

How much silver is included?

The details list both 5 grams and 6 grams of pure silver. Confirm the current allowance when booking. Additional silver is listed at IDR 80,000 per gram.

What types of jewelry can I make?

You can design a ring, bracelet, earrings, pendant, or another piece of jewelry. You can create your own design, except for the casting process.

Are gemstones included?

No. Local gemstones are available for an additional fee.

Is transportation included?

No shuttle is included. The class ends at the same meeting point where it begins. Online taxis such as Grab and Gojek can reach the workshop area.

How many people can join the class?

The maximum group size is five participants.

Can I cancel for a refund?

Yes. You can receive a full refund if you cancel at least 24 hours before the experience start time. Cancellations or changes made less than 24 hours before the start time are not refunded.